[IMAGE: https://i.imgur.com/1orfi4D.png]

The Core wallet was compiled on the latest distribution release of Raspbian OS(Stretch 2018-06-27)

Requirements

• Raspberry Pi 2B/3B(+)
• SD Card(Minimum 16GB) with Raspbian OS installed
• Some Coffee and free time 😛

Increase Swapfile

• Turn off swapfile.

sudo dphys-swapfile swapoff

• Edit the file “/etc/dphys-swapfile”.

sudo nano /etc/dphys-swapfile

We are going to change the default size of the swap file from 100 to 2048.

• Find the line:

CONF_SWAPSIZE=100

• Change To:

CONF_SWAPSIZE=2048

• Press CTRL-X and then Y, then Enter to save the file.

• Run the commands below to initiate this new swap file.

sudo dphys-swapfile setup && sudo dphys-swapfile swapon

Tweak Swap Settings: OPTIONAL(For faster and better experience)

• Type:

sudo sysctl vm.swappiness=20

• Edit the file "/etc/sysctl.conf".

sudo nano /etc/sysctl.conf

• Add to end of configuration file.

vm.swappiness=20

• Press CTRL-X and then Y, then Enter to save the file.

Install the Core Dependencies and Uninstall libssl-dev

• The reason we are uninstalling libssl-dev is that it requires an older version to compile the wallet on Raspbian Stretch.

• Copy and paste the entire commands below.

sudo apt-get update && 
sudo apt-get install -y build-essential git autoconf libminiupnpc-dev openssl libevent-dev libtool libboost-all-dev qt4-dev-tools libprotobuf-dev libqrencode-dev autoconf libdb-dev protobuf-compiler libdb4.8++ libdb5.3++-dev && 
sudo apt-get remove -y libssl-dev

Edit Repo Sources

Edit the file "/etc/apt/sources.list".

sudo nano /etc/apt/sources.list

• Find:

stretch main contrib non-free rpi

• Edit where it says stretch to jessie
• Press CTRL-X and then Y, then Enter to save the file.

Re-install libssl-dev

sudo apt-get update && sudo apt-get install -y libssl-dev

Revert edit on sources.list

sudo nano /etc/apt/sources.list

• Find:

jessie main contrib non-free rpi

• Edit where it says jessie back to stretch
• PressCTRL-X and then Y, then Enter to save the file.

Install Berkeley DB

• Copy and paste the entire commands below.

mkdir ~/bin &&
cd ~/bin &&
wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz &&
tar -xzvf db-4.8.30.NC.tar.gz &&
cd db-4.8.30.NC/build_unix/ &&
../dist/configure --enable-cxx &&
make &&
sudo make install &&
cd ~/bin

Install BitF Core

• Copy and paste the entire commands below.

git clone https://github.com/BitFdev/BitF-source-code &&
cd BitF-source-code &&
sudo chown -R pi:pi ~/bin/BitF-source-code &&
./autogen.sh &&
./configure --disable-tests --enable-upnp-default --with-incompatible-bdb --without-gui --with-libressl &&
make &&
sudo make install &&
cd ~

• Note: If you run into permission issues, type:
  `

Start BitF Daemon

• Create BitF Directory.

mkdir ~/.BitF

• Create and edit "BitF.conf" file.

sudo nano ~/.BitF/BitF.conf
* Just copy and paste the entire settings below(additional seed nodes included). Change yourmadeusername and yourmadepassword to your own name and password.

rpcuser=yourmadeusername
rpcpassword=yourmadepassword
rpcallowip=127.0.0.1
port=7337
listen=0
server=1
daemon=1
logtimestamps=1
maxconnections=256
addnode=167.99.183.252
addnode=178.128.25.138
addnode=178.128.43.83
addnode=178.128.39.66
addnode=178.128.32.217
addnode=209.97.182.142
addnode=178.128.39.66
addnode=178.128.32.217
addnode=209.97.182.142

• PressCTRL-X and then Y, then Enter to save the file.

• Start the daemon and let it sync.

BitFd

• To view blockhain sync:

tail -f ~/.BitF/debug.log

• PressCTRL-c to exit

Setup & Encrypt Wallet

• This is very strongly recommended to keep your funds secure but not required. Change YOUR_PASSWORD to your own password.

BitF-cli encryptwallet YOUR_PASSWORD

To Unlock Wallet

• TIMEOUT_TIME is the timeout period for how long the wallet will be unlocked.

BitF-cli walletpassphrase YOUR_PASSWORD TIMEOUT_TIME

Create New Address

• Change YOUR_WALLET_NAME to your own wallet name.

BitF-cli getnewaddress YOUR_WALLET_NAME

Unlock Wallet for Staking Only

• Change YOUR_PASSWORD to your own password, 99999999 is the timeout period for how long the wallet will be unlocked, but is enabled for staking only with true.

BitF-cli walletpassphrase YOUR_PASSWORD 99999999 true

• After unlocking the wallet for staking, wait sometime before checking Staking status.

BitF-cli getstakingstatus

• Results should look the same.

{
  "validtime": true,
  "haveconnections": true,
  "walletunlocked": true,
  "mintablecoins": true,
  "enoughcoins": true,
  "mnsync": true,
  "staking status": true
}

Backup Wallet!!!

• Example: BitF-cli backupwallet ~/Backup.

BitF-cli backupwallet ~/YOUR_DESTINATION_DIRECTORY

• For more wallet commands:

BitF-cli help

Where to get BitF tokens?

[IMAGE: https://cdn.steemitimages.com/DQmZ7FydzLMwKiPJNCaPPxA6Wm2MELiVBUGqUcZE4rAByut/image.png]
https://crex24.com/?refid=2v2uxfakq347onps8p36

Website: https://www.bitf.cc/
Twitter: https://twitter.com/BitFdev
Telegram: https://t.me/BitFChat
Github: https://github.com/BitFdev
Block Explorer: http://blockexplorer.bitf.cc/

For the latest updates, follow @bitf and join their Discord.

https://discord.gg/EtnS3TA

https://steemitimages.com/0x0/https://i.imgur.com/wCpvrbr.png
https://discord.gg/MM5vHss

Trade Bitcoin/Bitcoin Cash with Bitcoin/Bitcoin Cash!

Trade Forex and other legacy markets with Bitcoins