Hello hive! 🌟

This new month comes with a lot of peace, calmness, and celebration.

Last month, in one of my posts to this amazing community @diyhub, I made a tutorial on how to make perfect pearl cubes using straw beads and pearl beads. I promised to use those crafted cubes for jewelry, but the month got quite busy, and I couldn't make a follow-up post immediately.

Better late than never! Here's what I created:

Since I already had the pearl cubes ready, I decided to put them to good use. I made earrings for both my wife and my sister-in-law. My sister-in-law was so impressed that she chose to gift her pair to a friend as a birthday present!

[IMAGE: https://images.ecency.com/DQmNr1hyT3LTM7ug89gisq5zBucRcQfSJWsJ6ophExM33nt/1762343700270.jpg]

Because I already had the pearl cubes made, it took me less than 5 minutes to create each design.

Process

For this design, I used

[IMAGE: https://images.ecency.com/DQmNTw8NSP4CcFJHfaqxVGS4VsoHFUWCxkDncSX4kfMs5GV/1762335340063.jpg]

• Pearl cubes (from previous tutorial)

[IMAGE: https://images.ecency.com/DQmTdjTCLvpy5JAHTisswqUQJmvbc9KA2hW4AsGwDDxZ7JL/1762336884924.jpg]

• Earring hook

[IMAGE: https://images.ecency.com/DQmfCQ7Pi2HyDip4zQZGHxzGcGXNCNbF2cVSFxqcRAR5HmU/1762336926053.jpg]

• Small jump rings

[IMAGE: https://images.ecency.com/DQmfFAvxp8Z3xFBmKgjUKnAak3XNQQdWsQUkdarWusGnnKA/1762336973813.jpg]

• Jewelry plier
• Ring opener

Steps
- Using my ring opener and plier, I opened the jump rings and attached it to the pearl cubes, I joined 3 cubes together

[IMAGE: https://images.ecency.com/DQmX5h5M7GKJxyfNj1ejU3ENK5tB9uAKhCu7zuk98TFV88B/1762336337374.jpg]

[IMAGE: https://images.ecency.com/DQmVCUvWZ1Pggky36k7AoLbMa1kSQEdEyaWYTNwsRsKRgBK/1762336337861.jpg]

[IMAGE: https://images.ecency.com/DQmeLUtMtea34f5SH9Dd4XFzyDa2tmwgsUjiiRjZzEBVvgN/1762336338621.jpg]

[IMAGE: https://images.ecency.com/DQmPhZ9dsWcYASGCW3o1bTrhWFrKLod1R7eBSA6bQ9oJLNy/1762336338890.jpg]

• Connected earring hooks to the jump rings

And for this design, I used

[IMAGE: https://images.ecency.com/DQmf9MtpYkAuTtYRw3gd9icwoSmUWXgpHUgUviAF3LDBToZ/1762336155964.jpg]

[IMAGE: https://images.ecency.com/DQmRSzLHUqeiwtC3g5aKiqJ9b9ZzsMcEwUujXD1wnJt884Z/1762335441153.jpg]

• Pearl cubes (from previous tutorial)
• Earring hook
• Small jump rings
• Stainless jewelry chain
• Jewelry pliers
• Ring opener

Steps
- Using my ring opener and plier, I opened the jump rings and attached it to the earring hook and the jewelry chain
- I have already cut the chain into two different length, a short length and a longer one.

[IMAGE: https://images.ecency.com/DQmUrCwTF13CXRFqyKMYAtibHCpKmJZ9zZeENanrB6GiZ1G/1762336631491.jpg]

[IMAGE: https://images.ecency.com/DQmfFAvxp8Z3xFBmKgjUKnAak3XNQQdWsQUkdarWusGnnKA/1762336631814.jpg]

[IMAGE: https://images.ecency.com/DQmUuUN98GRD9sAScSiEXjVNE1gYFeooujyH9V7ibr9eMvk/1762336632081.jpg]

[IMAGE: https://images.ecency.com/DQmY1kwAhm7JCh75oxjgzeiKerGAFvWgKEWKi2BFn964ZsA/1762336632349.jpg]

[IMAGE: https://images.ecency.com/DQmRSzLHUqeiwtC3g5aKiqJ9b9ZzsMcEwUujXD1wnJt884Z/1762336632576.jpg]

• I attached the jump ring to each chain tip and joined 1 cube each to it

Having pre-made pearl cubes makes last-minute gift creation so easy! Both designs took under 10 minutes total, yet look professionally made, turns out to be beautiful and elegant!

[IMAGE: https://images.ecency.com/DQmf9MtpYkAuTtYRw3gd9icwoSmUWXgpHUgUviAF3LDBToZ/1762337263560.jpg]
This design is for my wife

[IMAGE: https://images.ecency.com/DQmQ9K8PG2DjyGtBLQY1jYRB84uxeTZiWd69TLPjYT7P4pi/1762337456412.jpg]
And this, a thoughtful birthday gift

Don't forget to check out my original pearl cube tutorial for the foundation of these designs!

https://ecency.com/hive-189641/@chatsunny/diy-perfect-pearl-cube-inq

Happy crafting, #diyhub family! 💎✨

@chatsunny