We got a little project to create the computer network using cable in 3 Schools. This network will be used to Students final exam it's computer based test. Very simple peoject, but it's take 4 up to 7 days to finish it.

So, what we need to start our job?

1. UTP Cable (we use ProLink cat 5e cable, I recommend it for low price, for bigger network please use better cat 5e cable, like : Belden, AMP, or some other familiar branded).
2. RJ45 Connectors (we're using AMP 2nd quality, again this is for low prices, I don't recommend it for bigger networks)
3. Switch/Hub. We are using 2 x 16 ports + 1 x 8 ports it's prepared for 35 clients and 1 server.
4. Crimping tools. There is too many various of crimping tools models, so please choose better one.
5. Electric sockets, as source of power supply for each computer.
6. Electric cable. I am using 2x1.5mm.
7. 25 Ampere Circuit breaker for each 10-12 computers, bigger is better.
8. Cable ducting. To hiding all cables.

https://img.esteem.ws/68n5uav6yp.jpg

First step, make a 6mm hole using a drill on the floor, and attach the Fischer to be installed screws and holding cable ducting.
https://img.esteem.ws/5aecf7pxtu.jpg

Place the electric socket near to cable ducting. Make a hole too and attach fischer.
https://img.esteem.ws/oah94wmbol.jpg

Then, put UTP and electric cables into the duct and connect it to hub and computer.
https://img.esteem.ws/qgufqfwyir.jpg

Then when every thing finished, close the duct by it cover and then cleaning the room.
https://img.esteem.ws/mv9xj8byvx.jpg

I am too busy to start writing and write long explain about this. there is too many job to be finished in this short time.

thanks for visit my blog.

Best regards
@ecomp