Previous update: https://steemit.com/blog/@lostgeneration/project-vehicle-update-9

So I have been sick and essentially bedridden for 2 weeks, but today I willed myself to the shop to work on something. Instead of working in the colder and harder to heat shop, I decided to work on something in the insulated building. So I began the process of checking and rebuilding the transfer case of the Blazer. The transfer case is what enables 4 wheel drive and range selection of 2 high, 4 high, 4 low, etc. A mechanism activates via lever to select range, which connects or disconnects the front drive shaft output to the rear drive shaft output. This is done with a drive gear, driven gear, and chain.

[IMAGE: https://cdn.steemitimages.com/DQmcQStJjABriWUEGFmifs6iVXYJnLhNitpW1Wb31XsFUYK/20190123_145015.jpg]
NP-208 transfer case.

[IMAGE: https://cdn.steemitimages.com/DQmWZ3v9ZcgDtrQivBLZVsoqHspng2k8kw8EuFaGW25M3Ht/20190123_162702.jpg]
Rear retainer removed.

[IMAGE: https://cdn.steemitimages.com/DQmaNc1LGLYtWmXdVHtUVBxvK93W9tHds5yFVYFppHZcaKs/20190123_165002.jpg]
Rear case removed.

[IMAGE: https://cdn.steemitimages.com/DQmc2bVwQ1R7tsfuyHjW7hn28WznPHUNFoFBHN68vhVAWpX/20190123_180805.jpg]
Drive gears and chain removed.

[IMAGE: https://cdn.steemitimages.com/DQmdmqRhaKhD66xURMRo1hEU8qKGarqMj7Rpq8iWiWQVFeR/20190123_190343.jpg]
Fully disassembled.

[IMAGE: https://cdn.steemitimages.com/DQmQniRtcaERTXP7uH2q4etoGTqeFhK2SkzNZam9HKoHUdq/20190123_185246.jpg]
Planetary assembly.

Stay tuned for future updates.