My friends I am back with the more hair accessories idea. But this accessories which is a headband is totally different from my previous because in this had bad it's kind of plating or we can say a type of bread design is there so the final outcome of this headband looks fabulous and more over the clothes which I have used is also stunning the colour of it shining and it looks fabulous on the head. So it is my first time and I did some mistakes while doing the braid because the stitches work coming at the part and then I have to open this again whole from the start then I have to plate again so that was the little bit difficult but however I have tried my best to manage this and to give my 100% and get the good result of that and I got the good result. First I was thinking to iron the cloth which I am going to use but later I thought how ever it is going to be in a braid so it will get wrinkles at all so it's better to not I am this so I have avoided that and also my fabric was not that much bearable for the ion in I have avoided it.

[IMAGE: https://images.ecency.com/DQmUhtjAgukELfMemB8sT95sz6nwRqa3Rmt5T9bi6FxiWgL/1749056627492.jpg]

Let's do it.

The starting piece of cloth I have taken with the length of 20 inches and wet of 4 inches.

[IMAGE: https://images.ecency.com/DQmVUSwdx2Yzg5g1hKtdgFbJHeKeHcuYb1nri67PgzxcCFY/1749056627559.jpg]

One side stitch I have done for that by folding it.

[IMAGE: https://images.ecency.com/DQmd7ksQGBDQj5JEy5Z8pGs4ieu9nmHfYVH11osZcHxb9VY/1749056627600.jpg]

The stitches we have to put upside down using the safety pin or some other kind of pin.

[IMAGE: https://images.ecency.com/DQmcRapxkFmkGzAv5qoS81HahJcFyyL7YgXszFspecpHZHo/1749056896007.jpg]

So we get a type of roll there and that role we have to use three.

[IMAGE: https://images.ecency.com/DQmXTSVHzm7MuYLwoycgLPBKt9mGR4aWxNMZAUVVWfJtMa5/1749056896083.jpg]

I have taken the wool to insert in that so I have taken certain amount of wool just fill inside we can fill in however way we want. But I have taken the size with the length size and then just inserted it.

[IMAGE: https://images.ecency.com/DQmZQjR4PmGbMToF6xnxwUrZSwDQJCoYKfw9PjQ4rNcC6T2/1749057062881.jpg]

[IMAGE: https://images.ecency.com/DQmYr7R5Kn8W5WYeYimxpWFKqtgAHyjHRKWBm9LkT8GgXKq/1749057062978.jpg]

[IMAGE: https://images.ecency.com/DQmRc2oQ1H7BwBxkXvu3fHEHCs9gV3fU1L2tnmJXqBfYGuM/1749057063067.jpg]

For plating I have attached hair clip on the top.

[IMAGE: https://images.ecency.com/DQmPxgFMVkEAirvHJoYXAuDVoEnafckynzRguvgF1XNKR2C/1749057063137.jpg]

[IMAGE: https://images.ecency.com/DQmSE1A81bdqjkBCTT5kQjq4LHZ5oKGx5kqrVNKnsQxtmk3/1749057063195.jpg]

Then started to plate it. One on the other. The way we are getting it.

[IMAGE: https://images.ecency.com/DQmcR1mk7EF5vvkJpHyEdPPLFEuhhcqJnwJEDmsv8eo56YF/1749057187819.jpg]

Not too tight not too lose also.

[IMAGE: https://images.ecency.com/DQmZeiwFVrAb8SW6jnYP9pWkrMnz7MQTUWUSBP4qgzUrw8R/1749057187893.jpg]

[IMAGE: https://images.ecency.com/DQmfN6SnhCqmhajhJLBEVsCmLjEfurgdjhNVQcytw7CrsFR/1749057187987.jpg]

For making them lastic for the headband I need some time so on the other side also I have attached the hair clip.

[IMAGE: https://images.ecency.com/DQmNsY1Xu5oqYhV2T43Dr6nCfBsok37Aq3guHHgQFyJKJuA/1749057188062.jpg]

The cloth of 10 inches i have used and stitched elastic in that.

[IMAGE: https://images.ecency.com/DQmVBU2smzka6ZSdRRxpZHn1EhzrGahrzCEiyT4dJ2AS5EF/1749057286544.jpg]

[IMAGE: https://images.ecency.com/DQmbWbF4583gy99CpzqLaqCtHrModCdq8s4sCnuFBTxYBVC/1749057286586.jpg]

That elastic we have to attach with the braided cloth.

[IMAGE: https://images.ecency.com/DQmPmxSEJ684MCZq3BgPWPx3tbGmQRB8Ye5aGaAWTPhnM1A/1749057286633.jpg]

That elastic size we can adjust by the size of our head also the braided one also we can adjust.
Here is the final headband .

[IMAGE: https://images.ecency.com/DQmUhtjAgukELfMemB8sT95sz6nwRqa3Rmt5T9bi6FxiWgL/1749057421526.jpg]

Bye for now.