hello everyone today I'm going to show you guys how I make this trouser for my brother.
here are the measurements
Waist 32
length 38
Lap 12
and also this is the material I'm going to use for cutting this trouser.
[IMAGE: https://files.peakd.com/file/peakd-hive/respect01/AJkRSrkDiowFchzdAaRTspYBz3JWXbbSRjqPXyRQ2EKz8ho4s2RAp68eArDcUHn.jpg]
This cutting is both the front and back of the trouser. the back is 3 inches higher than the front, because of rubber I'm going to put at the back of the trouser.
[IMAGE: https://files.peakd.com/file/peakd-hive/respect01/23tvifyEiStD7b1sun462LPn6V5HcZz31DhVWwGGmxRdoDX9wLvvaGCC8n43Xn1yqRRxb.jpg]
i made a cutting 3 in wide and 4 in in length for the pocket material to turn it, and make the pocket with it.
[IMAGE: https://files.peakd.com/file/peakd-hive/respect01/23yTfQv61h5cP3ktD45AHkZF3hx2Qy7A9VRKNTSo9JnBioNPgLB1vZz41PQfEt7h4EZWQ.jpg]
this is how it looks like after I've turned it there are different ways to make this market but this is for jean trouser actually.And this is why it has much wideness.
after I'm done with the pocket of both sides I'm moving on to you put on my zipper to the trouser and this is how it will look like I'm using an iron zip because it's jean trouser.
[IMAGE: https://files.peakd.com/file/peakd-hive/respect01/23uQpH4mEJPLvrSEqtHyDY6X1rwThcSZ4qqwTRRAsiNtXYVQQ79XyYCsFk3qTidRAQSv8.jpg]
this is the two different pocket for the backside I'm going to put it in the back of the trouser. this one is very simple I'm just going to pin it at the back of the trouser and then stick it.
[IMAGE: https://files.peakd.com/file/peakd-hive/respect01/23wC7Z9t3Zp351zGrqufQDd5q9htyxEwvfiLXFsUjeDvxnTj6E7G83TB2UKXHSaeRgDFH.jpg]
After this one there is another pocket I'm going to put in the side of the trouser this is it I've made it already. what I just need to do is to place it at the side of the trouser and stitch.
[IMAGE: https://files.peakd.com/file/peakd-hive/respect01/23vi1iwWEikKUGDj9J5WfaWLuijyNXbqyKGfDMvnPRx4q1GencvQPfrY9dXPRcwkSBD3E.jpg]
After this pieces here I'm using it for my waist I will stitch it and turn it over to make my front waist.
[IMAGE: https://files.peakd.com/file/peakd-hive/respect01/EoGxufv7BrPCdgED2KNq95EzjBMtzXyBcTnG9cMPge43jPSMCzSw5mFe8jn54UiTT6m.jpg]
For the back waist this is a rubber I'm going to use the turn it over to make it. what I need to do is to stitch the rubber at both sides of the trouser edges, after that I turned it over and stitch.
[IMAGE: https://files.peakd.com/file/peakd-hive/respect01/AKCGxFpXGU5s1n8f4BqveL8AfF4mUMiVXuFsaSG8rjpJU6gNnsvTntE5WchB8PC.jpg]
this is how it looks when I'm done turning the back waist.
[IMAGE: https://files.peakd.com/file/peakd-hive/respect01/23xefJYhyHV5ARethgbh6N1rS2jkiVQ5N1JLFdUZR3nuPG6jJBzSt98W9Hvz8VS2Tw2Fe.jpg]
And also this is the finishing after trouser.
[Thank You So Much For Stopping By]